Official_Rogue_Recon_Logo
Armory

Base | Scenarios | Rental Prices | Rules | Recruits | Troops | Game Pics | Recon Pics | Armory | Advice | Fields | Links | EXT. Calander

Welcome the first vehical to our motorpool.

T3-A1 "Dragon" Infantry Fighting Vehical

After much work over the course of a year by Jason Dunbar and Jared Yuill the Dragon should be availiable for use whenever a sutable field arises. All problems seem to have been solved and we are now just needing to drive her up on the trailer and pull her to the field.(funny it took about 10 minutes to put that fuel line on, and that is what held us up for about 8 weeks.)



The KRTS Mobile Shop(soon to be the "Rogue Recon Mobile Shop"

Jason Dunbar has bought a one ton box truck that will be used to haul all nessesary equipment(Medical and marker tools) and the T3-A1 to the field.



M-8265A Howitzer

This item once finished will be the Anti-Vehical weapon used on mainly open field situations. With its 5 foot long by 4 inch wide barrel, it will launch a round carrying around 1 pint of paint solution to approximatly 300 feet away. It will also be able to launch long range Field Support items such as smoke screen or flares. The weapon will be recharged by a 20lbs CO2 tank. Total cost with labor added=450.00



M-376P Anti-Personel Mine

This item which is half built will deliver 1 ounce of paint solution about 3 feet in a spray pattern(tests completed). Prime use will be to bury underground and fire along the side of victum player's leg. The firing system has been tested and works. All that lacks it the case.Projected Costs=55.00



M-86 Morter

The Morter will be very similar to the Howitzer in design but built on a smaller scale and made to fit a wheeled base or be carried on a troop's back. The current prototype has been built to fit a wheeled base. It has a 3 inch barrel that is 5 feet long, the expansion chamber is about 2.5 feet by 2.5 inches. The prototype was made from scrap metal to test if the design was going to work. Most current testing provided were using a 2 inch barrel with two successful shots reaching 300 feet at about a 45 degree angle with 500 P.S.I. in the expansion chamber. The design will allow for morter rounds, smoke screens, and flares. Current estimated total after materials/labor= 250.00(subtract 30 if desiring a troop carried version. This morter is a prototype, the final version will be made with new materials... keep that in mind before discriminating against it.



S.L.A.P. Launcher(Surface Launched Anti Personel)

This weapon will by far be the M-204 of paintball but made much less expensive as the professional ones sold by Tippman Ordinance. They will be ultra-short range in that usually The use will be for a max 40-60 ft away target bunkered or a CQB game where you may be breeching and need something to take out a couple players. It will be rigged for three uses. Grenades(paint,flash,smoke), Buck Shot spray(fitted with splitter on barrel to make paint grenade spray out for close ranges), and shot gun(paintballs used in conjunction with a sabbot to produce shotgun effect). Most likly the player will only get a couple of shots out before losing vital pressure.